Connectors
Request a quotation
A range of connectors specially suited to power and lighting applications
2.1mm Push On Power Connector
2.1mm Push On Power Connector range rom from Tiger Power are fast fit connectors consisting of a plug and socket. The industry standard size of 2.1mm is the most common DC power connector type in the industry. To use, just strip the wires, push the top level down and insert the cable. Once the lever is released the cable is locked in place
Part number: CON21-TERM and CON21-TERM-SOCKET
(refer to data sheet below)
- 8A maximum current rating
- 48V maximum voltage rating
- Perfect for AC or DC applications
- UK stock for fast delivery
- Fast and easy to use
- Both plug and socket available
- Industry Standard Size
Waterproof Cable Joint with Quick Wire Connector
Waterproof Cable Joint with Quick Wire Connectors from from Tiger Power are a range of fast fit connectors for connecting single or multiple wires together in a low cost, time saving way. They come in both 2 pole and 3 pole options. Supplied by one of the UKs leading providers of power supply products
Part number: CON-WP-IP68 (refer to data sheet below)
- Quickly connect single or multiple wires together
- Waterproof housing rated to IP68
- Split one wire into multiple outputs
- 250v rated
- Perfect for AC or DC applications
- 32A maximum rated current
- UK stock for fast delivery
- Compact design and reliable build
Heat Shrink Solder Sleeve
Heat Shrink Solder Sleeves from Tiger Power in a wide range of sizes. These connectors allow two wires to be quickly and easily joined, combining an adhesive inner lining for a water tight seal and enhanced connectivity thanks to the low melt point solder section.
Part number: TGR-HSS series (refer to data sheets below)
Click here to view the TGR-HSS on our distributors site- Quickly connect single or multiple wires together
- Suitable for wires from 0.25mm to 10mm
- Wire sizes from AWG8 to AWG26
- 7 different size options
- No crimping required
- Low cost and easy to use
- UK stock for fast delivery
- Waterproof seal - Built in solder & adhesive linings
Quick Wire Connectors
Quick Wire Connectors from from Tiger Power are a range of fast fit connectors for connecting single or multiple wires together in a low cost, time saving way. They come in a comprehensive range of options starting with a single input to single output unit, up to our 20 input to 20 output connector. Supplied by one of the UKs leading providers of power supply products
Part number: TGR-QX-XX (refer to data sheets below)
- Quickly connect single or multiple wires together
- Split one wire into multiple outputs
- Suitable for wire sizes from AWG12 to AWG28
- 250v rated
- Perfect for AC or DC applications
- 32A maximum rated current
- UK stock for fast delivery
- Compact design and reliable build
DC Splitter Connectors
DC Splitter Connectors from Tiger Power Supplies. These splitters feature heavy duty input and output screw terminals making them better suited for higher current applications than traditional splitter cables. Each unit has a maximum input rating of 50 amps and each output channel is rated at up to 10 amps. 5 versions are available making it possible to split your single DC input between 3, 4, 6, 8 or up to 9 outputs. These high current splitter connectors are only suitable for DC applications. Not suitable for AC use. Industrial grade components for safety and reliability. Supplied by Tiger Power, a UK based dedicated supplier of power conversion products
- Input side (2 terminals) rated at 5v DC to 48v DC at 50A max.
- Output side rated from 5V DC to 48V DC at 10A per output channel
- 5 versions available offering a choice of 3, 4, 6, 8 or 9 outputs
- Power many devices from a single input
- No minimum load
- Supplied complete with terminal cover and screws
- Can be fixed down for added security
- Compact footprint
- UK stock
- Suitable for a wide range of applications
Polarity Change Connectors
Polarity Change Connectors available as 2.1mm or 2.5mm industry standard sizes. These connectors simply push onto the existing DC output connector of a power supply. Convert the polarity from positive centre (+ve centre) to negative centre (-ve centre) without removing the existing molded connector. This helps to maintain reliability and mechanical integrity of the existing power supply cable. They provide an alternative solution to cutting off and re-fitting an existing connector to switch the polarity. Particularly useful when the guage or thickness of the DC output cable is large enough to make it problematic to fit a new solder on connector. They can also provide a fast, low cost solution when a high volume of power supplies is needed with reverse polarity. Part of a wide range of DC power connectors from Tiger Power. A data sheet is available to download below.
Please contact us for direct pricing
Alternatively CLICK HERE to buy these polarity change connectors from our distributor