Shop
Request a quotation
Ultra High Brightness LED Strip TGR-UHB series
Model TGR-UHB series (refer to data sheet below for full range)
- Colour options from 2550K to 6800K
- Choice of power ratings from 14.4 watts to 43.2 watts per metre
- Fully dimmable by a wide range of methods including PWM, 0-10V, DALI and DMX
- Supplied on 5 or 50 metre reels or supplied in custom lengths
- operates from 24vdc constant voltage input
- High CRI 90 or above
- Up to 160 lumens per Watt
- Available as standard and waterproof
- Double side thermal conductive tape or 9080H 3M self adhesive tape
- Super High Luminous Flux
- Up to 6826 lumens per metre
LED Strip – Continuous Light – No Dot Series – 10W/M
Model CON-XXXXK-xxV
- XXXXK = colour temperature - see data sheet for options
- Choice of 5 light colours
- Features hidden control resistor and 512 flexible chips per metre
- Supplied on 5 metre reels
- 24vdc or 12vdc input ranges available - see data sheets below
- Cuttable every 35.7mm (12v) or 62.5mm (24v)
- CRI>92 (colour render index)
- Up to 100 lumens per Watt
- Power usage 10 watts per metre (50 watts for 5 metre reel)
LED Panel Light 6500K 38W 595 x 595mm
Model PANEL-38W-CW
- Lumen output 3800lm (100lm/W) High Brightness
- 6500K Cool White Light
- Supplied complete with LED driver
- Easy install - Just drop into ceiling grib to replace existing ceiling panels
- Dimensions 595 x 595mm
- IP20 rated for indoor use only
- Durable Aluminium contrustion for superior heat dissipation
- 30,000 hour expected life span
- UK stock for fast delivery
LED Strip Fixing Clips
LED Remote Controller & RF Wireless Receiver M1 + M3-3A
Model M1+M3-3A
- RF Signal remote and wireless receiver - no line of site needed
- Suitable for dimming and turning on/off of single colour LED strip lighting
- M1 Remote dimensions 104 x 60 x 9mm
- M3-3A wireless receiver dimensions 135 x 30 x 20mm
- Input 12-24vdc (input should match the rating of the LED strip)
- Pair 1 remote to multiple receivers for simple control of different areas
- (Multi zone not supported - all areas will work together - other options available)
2.1mm Socket to Screw Terminals
Model CONN-SOCKET
A simple 2.1mm socket which mates with the DC output connector fitted to our standard range of plug in and desktop power supplies. Quickly attach a length of 2 core cable to one side via the screw terminals and then simply push the connector onto the DC connector of our power supply and power up your deviceEuropean Re-Wireable Plug 2 Pin 2.5A
European Re-Wireable Schuko Plug
PAD55A 55W Dual Output with Battery Charger (UPS Function)
- Part number PAD55A
- Universal AC input / Full Range
- Short circuit, Over load and Over voltage protection
- Battery low protections
- Cooling by free air convection
- 100% full load burn in test
- Output channel 1: 13.8vdc 3.5A (51.38W) Voltage adjustment 12 - 14.5vdc
- Output channel 2: 13.4vdc 0.23A
- UL 62368-1 and EN62368-1 safety approval
- Dimensions: 159.9 x 97 x 38mm
Open Frame Power Supply 30W
- Universal 85-264VAC or 100-370VDC input voltage
- 2.5×1.8 inch high power density
- Operating ambient temperature range -25℃ to +70℃
- Output short circuit, over-current & over-voltage protection
- High efficiency, high reliability
- Regulated output, low ripple & noise
- EMI performance meets CISPR32/EN55032 CLASS B
- 2 years warranty
- Safety according to UL/EN60335 AND 62368

Lugged Power Supplies
Industrial Power Supplies
Open Frame Power Supplies
Security Power Supplies
Din Rail Power Supplies
Battery Chargers
Custom Power Supplies
Switch Mode Power Supplies
Waterproof LED Drivers
LiFePO4 Batteries
Mains Leads
DC Cables
Rewireable Plugs
LED Strip
LED Controllers
LED Lighting Accessories
LED Panels
Fixed Input Unregulated – PCB mount
Fixed Input Regulated – PCB mount
Wide Input Regulated DC-DC Converters – PCB mount
Switching Regulators – PCB mount
High Power DC-DC Converters – Industrial Enclosed (15W to 1000W)
Railway Standard DC-DC Converters EN50155 – 100W to 300W
Open Frame DC-DC Converters – 5W to 45W