Shop
Request a quotation
Ultra High Brightness LED Strip TGR-UHB series
Model TGR-UHB series (refer to data sheet below for full range)
- Colour options from 2550K to 6800K
- Choice of power ratings from 14.4 watts to 43.2 watts per metre
- Fully dimmable by a wide range of methods including PWM, 0-10V, DALI and DMX
- Supplied on 5 or 50 metre reels or supplied in custom lengths
- operates from 24vdc constant voltage input
- High CRI 90 or above
- Up to 160 lumens per Watt
- Available as standard and waterproof
- Double side thermal conductive tape or 9080H 3M self adhesive tape
- Super High Luminous Flux
- Up to 6826 lumens per metre
LED Strip – Continuous Light – No Dot Series – 10W/M
Model CON-XXXXK-xxV
- XXXXK = colour temperature - see data sheet for options
- Choice of 5 light colours
- Features hidden control resistor and 512 flexible chips per metre
- Supplied on 5 metre reels
- 24vdc or 12vdc input ranges available - see data sheets below
- Cuttable every 35.7mm (12v) or 62.5mm (24v)
- CRI>92 (colour render index)
- Up to 100 lumens per Watt
- Power usage 10 watts per metre (50 watts for 5 metre reel)
LED Panel Light 6500K 38W 595 x 595mm
Model PANEL-38W-CW
- Lumen output 3800lm (100lm/W) High Brightness
- 6500K Cool White Light
- Supplied complete with LED driver
- Easy install - Just drop into ceiling grib to replace existing ceiling panels
- Dimensions 595 x 595mm
- IP20 rated for indoor use only
- Durable Aluminium contrustion for superior heat dissipation
- 30,000 hour expected life span
- UK stock for fast delivery
LED Strip Fixing Clips
LED Remote Controller & RF Wireless Receiver M1 + M3-3A
Model M1+M3-3A
- RF Signal remote and wireless receiver - no line of site needed
- Suitable for dimming and turning on/off of single colour LED strip lighting
- M1 Remote dimensions 104 x 60 x 9mm
- M3-3A wireless receiver dimensions 135 x 30 x 20mm
- Input 12-24vdc (input should match the rating of the LED strip)
- Pair 1 remote to multiple receivers for simple control of different areas
- (Multi zone not supported - all areas will work together - other options available)
2.1mm Socket to Screw Terminals
Model CONN-SOCKET
A simple 2.1mm socket which mates with the DC output connector fitted to our standard range of plug in and desktop power supplies. Quickly attach a length of 2 core cable to one side via the screw terminals and then simply push the connector onto the DC connector of our power supply and power up your deviceEuropean Re-Wireable Plug 2 Pin 2.5A
European Re-Wireable Schuko Plug
PAD55A 55W Dual Output with Battery Charger (UPS Function)
- Part number PAD55A
- Universal AC input / Full Range
- Short circuit, Over load and Over voltage protection
- Battery low protections
- Cooling by free air convection
- 100% full load burn in test
- Output channel 1: 13.8vdc 3.5A (51.38W) Voltage adjustment 12 - 14.5vdc
- Output channel 2: 13.4vdc 0.23A
- UL 62368-1 and EN62368-1 safety approval
- Dimensions: 159.9 x 97 x 38mm
Open Frame Power Supply 30W
- Universal 85-264VAC or 100-370VDC input voltage
- 2.5×1.8 inch high power density
- Operating ambient temperature range -25℃ to +70℃
- Output short circuit, over-current & over-voltage protection
- High efficiency, high reliability
- Regulated output, low ripple & noise
- EMI performance meets CISPR32/EN55032 CLASS B
- 2 years warranty
- Safety according to UL/EN60335 AND 62368