Shop
Request a quotation
Plugtop Power Supplies
International Power Supplies
International Power Supplies, also known as interchangeable AC pin power supplies are a range of products where each unit is supplied with up to 4 AC pins as standard. The AC pins can be easily changed to suit the region in which the product is to be used. This means just one power supply is suitable for world use. Traditionally, multiple versions would need to be stocked and approved for use to cover global markets. The power supplies are all safety approved and meet latest energy efficiency requirements.
Desktop Power Supplies
Plugtop Power Supplies – Adjustable Output Voltage
Switching Regulators 500mA R3 series
DC-DC Converters – Unregulated
LED Drivers – Thin Series
12V LED Driver
12V LED Driver series in a wide range of power ratings from 6W to 200W. These LED drivers are suitable for indoor use only and provide a constant voltage output which is regulated to 12V to power your LED lighting such as strip lights and bulbs. All of our LED drivers meet latest safety and efficiency standards. They have built in safety features such as short circuit and over load protection. They are long life and designed in a compact housing. Choose the power rating from the drop down box below to display additional information. If you are a business our range of 12V LED Driver power supplies are available direct. If you require a small quantity or next day delivery, a selection of our LED drivers are available through our distribution partners
To view our range of LED drivers at our distributor CPC, please click here
Tiger Power keep a high volume of 12V LED Driver units in UK stock so we can provide very competitive pricing as well as fast delivery and full technical assistance. We have over 20 years of industry experience and specialise in power conversion products. Contact us for technical assistance or direct pricing
LED Driver Dimmable
LED Driver Dimmable series from Tiger Power Supplies. UK stock of a wide range of constant voltage LED drivers which are recommended for use with a good quality load low wall dimmer switch to facilitate brightness adjustment of your LED lighting such as bulbs and LED strip lights. This range of LED Driver Dimmable units feature soft start and low ripple and noise. The utilise long life electrolytic capacitors for improved reliability. They have high efficiency and meet latest safety standards to EN 61347-1. Input and output connection is via screw terminals for fast installation.
- Wide range 180-240vac input
- Soft start
- Low Ripple & Noise
- Long Life Components
- Indoor Use Only
- Screw terminals for fast installation
- Power Factor Correction (PF > 0.95)
- Perfect for use with LED strip lighting and 12V or 24V bulbs
- Available in both 12V and 24V
- Power Ratings from 12 Watts to 100 Watts
- Refer to datasheet below for full details including dimensions
- Dimmable Range 10-100% typical (varies according to quality of wall dimmer switch
60W LED Driver 12V Waterproof
60W LED Driver 12V Waterproof from from Tiger Power is a single output constant voltage LED driver rated to IP67 making it suitable for use indoors or outside. The IP67 rating of this LED driver means it is totally protected against dust and also protected against the effects of temporary immersion to a depth of between 15cm and 1 metre for up to 30 minutes. The IP rating of this 60W LED Driver 12V is provided by the two numbers, (the 6 and the 7) with an IP67 rating providing one of the highest levels of protection against the elements helping to ensure reliability.
This led driver power supply has no minimum load so it can be used for any application that requires 12V up to its maximum rating of 5 amps / 60 Watts. This means for example, it can be used to power some LED strip that only requires 5 watts of power. The LED strip or other lighting will only draw as much power from this LED driver as it requires. Supplied by one of the UKs leading providers of power conversion products. Please get in touch for direct pricing or technical assistance.
Part number: TGR-60W-12V-W
- Single constant voltage, regulated 12V output
- No minimum load - Use for any requirement from 0 amps (0 watts) to 5 amps (60 watts)
- 220vac to 240vac input (suitable for use in UK and Europe)
- CE and UKCA safety marked and approved
- Short circuit and over load protection for safety
- IP67 rated for dust and water protection - can be used inside or outside
- Consult with an electrician before installing
- Meets latest efficiency legislation & features very low no load power consumption
- 15cm in / out cable lengths - to extend cables use with our waterproof cable joints
- Compact size - measuring 163 x 43 x 33mm
75W IP67 Waterproof LED Drivers
- Constant Voltage Output either 12vdc or 24vdc
- 5 Year Warranty
- CE and UL approved
- 100-240vac Input
- Over Voltage, Overload, Short Circuit & Over Temperature Protection
- IP67 rated for Ingress Protection
- 100% Full Load burn in tested
- Class II design
- Power Factor > 0.9
- Safety approved to EN61347-1, EN61347-2-13
- Dimensions: 140 x 63 x 32mm
100W IP67 Waterproof LED Drivers
150W IP67 Waterproof LED Drivers 12V 24V
- Constant Voltage Output either 12vdc or 24vdc
- 5 Year Warranty
- CE and UL approved
- 100-240vac Input
- Over Voltage, Overload, Short Circuit & Over Temperature Protection
- IP67 rated for Ingress Protection
- 100% Full Load burn in tested
- Class II design
- Power Factor > 0.9
- Safety approved to EN61347-1, EN61347-2-13
- Dimensions:
- See full data sheet below
200W LED Driver IP67 Waterproof 12V 24V
- Constant Voltage Output either 12vdc or 24vdc
- 5 Year Warranty
- CE and UL approved
- 100-240vac Input
- Over Voltage, Overload, Short Circuit & Over Temperature Protection
- IP67 rated for Ingress Protection
- 100% Full Load burn in tested
- Class II design
- Power Factor > 0.9
- Safety approved to EN61347-1, EN61347-2-13
- Dimensions: 199 X 63 X 35.5MM
- See full data sheet below
Mains Leads
Tiger Power Supplies offer an extensive range of mains leads available as UK, European, USA, Australian and bare end versions. Not only do we have plenty of options for the plugs, we also are able to supply different lengths and input leads - whether you need an IEC kettle lead or C8 Figure 8 we can be sure to help. We have a great variety of parts in stock ready to ship at very competitive prices. All the mains leads we offer meet the standards for the country it is designed to be used in. If you cannot see the type of power cord you need, please contact us at info@tigerpowersupplies.com as we also offer a custom build service.
2.1mm Push On Power Connector
2.1mm Push On Power Connector range rom from Tiger Power are fast fit connectors consisting of a plug and socket. The industry standard size of 2.1mm is the most common DC power connector type in the industry. To use, just strip the wires, push the top level down and insert the cable. Once the lever is released the cable is locked in place
Part number: CON21-TERM and CON21-TERM-SOCKET
(refer to data sheet below)
- 8A maximum current rating
- 48V maximum voltage rating
- Perfect for AC or DC applications
- UK stock for fast delivery
- Fast and easy to use
- Both plug and socket available
- Industry Standard Size
Waterproof Cable Joint with Quick Wire Connector
Waterproof Cable Joint with Quick Wire Connectors from from Tiger Power are a range of fast fit connectors for connecting single or multiple wires together in a low cost, time saving way. They come in both 2 pole and 3 pole options. Supplied by one of the UKs leading providers of power supply products
Part number: CON-WP-IP68 (refer to data sheet below)
- Quickly connect single or multiple wires together
- Waterproof housing rated to IP68
- Split one wire into multiple outputs
- 250v rated
- Perfect for AC or DC applications
- 32A maximum rated current
- UK stock for fast delivery
- Compact design and reliable build
Heat Shrink Solder Sleeve
Heat Shrink Solder Sleeves from Tiger Power in a wide range of sizes. These connectors allow two wires to be quickly and easily joined, combining an adhesive inner lining for a water tight seal and enhanced connectivity thanks to the low melt point solder section.
Part number: TGR-HSS series (refer to data sheets below)
Click here to view the TGR-HSS on our distributors site- Quickly connect single or multiple wires together
- Suitable for wires from 0.25mm to 10mm
- Wire sizes from AWG8 to AWG26
- 7 different size options
- No crimping required
- Low cost and easy to use
- UK stock for fast delivery
- Waterproof seal - Built in solder & adhesive linings
Quick Wire Connectors
Quick Wire Connectors from from Tiger Power are a range of fast fit connectors for connecting single or multiple wires together in a low cost, time saving way. They come in a comprehensive range of options starting with a single input to single output unit, up to our 20 input to 20 output connector. Supplied by one of the UKs leading providers of power supply products
Part number: TGR-QX-XX (refer to data sheets below)
- Quickly connect single or multiple wires together
- Split one wire into multiple outputs
- Suitable for wire sizes from AWG12 to AWG28
- 250v rated
- Perfect for AC or DC applications
- 32A maximum rated current
- UK stock for fast delivery
- Compact design and reliable build
DC Splitter Connectors
DC Splitter Connectors from Tiger Power Supplies. These splitters feature heavy duty input and output screw terminals making them better suited for higher current applications than traditional splitter cables. Each unit has a maximum input rating of 50 amps and each output channel is rated at up to 10 amps. 5 versions are available making it possible to split your single DC input between 3, 4, 6, 8 or up to 9 outputs. These high current splitter connectors are only suitable for DC applications. Not suitable for AC use. Industrial grade components for safety and reliability. Supplied by Tiger Power, a UK based dedicated supplier of power conversion products
- Input side (2 terminals) rated at 5v DC to 48v DC at 50A max.
- Output side rated from 5V DC to 48V DC at 10A per output channel
- 5 versions available offering a choice of 3, 4, 6, 8 or 9 outputs
- Power many devices from a single input
- No minimum load
- Supplied complete with terminal cover and screws
- Can be fixed down for added security
- Compact footprint
- UK stock
- Suitable for a wide range of applications
2.1mm Extension Cables
A range of 2.1mm extension cables in lengths of 1.5 metres up to 10 metres. These 2.1mm extension cables are compatible with our standard range of plug top and desktop power supplies. Just plug this cable into the DC connector of the power supply to make the lead longer
Choose your required length using the drop down box belo
2.1mm DC Splitter Cables
A range of cables which split a single output from a power supply to enable you to simply power either 2, 4 or 8 devices from a single power supply. Use in conjunction with any of our power supplies that are fitted with a 2.1mm DC output connector. They have a 2.1mm socket on the input and either 2, 4 or 8 way 2.1mm connectors on the output. These 2.1mm splitter cables enable you to power multiple units from just one power supply
2.1mm Socket Cable On Off Switch
2.1mm socket cable with integral on off switch. This 30cm cable in Black makes it easy to control the power to your device. The unit provides a low cost, effective solution. Rated to 5 amps, this DC cable can be simply pushed onto the output connector of any power supply fitted with a 2.1 x 5.5mm connector
Part number CA-5521-SWITCH
- 30cm length
- Available in a choice of Black and White colour options
- UK stock
- Industry standard 2.1mm x 5.5mm connector
- Customised options available on request
- High quality components and materials
- Suitable for the control of a wide range of devices
DC Red Black Cable 2.1mm Connector and Screw Terminal Block
Polarity Change Connectors
Polarity Change Connectors available as 2.1mm or 2.5mm industry standard sizes. These connectors simply push onto the existing DC output connector of a power supply. Convert the polarity from positive centre (+ve centre) to negative centre (-ve centre) without removing the existing molded connector. This helps to maintain reliability and mechanical integrity of the existing power supply cable. They provide an alternative solution to cutting off and re-fitting an existing connector to switch the polarity. Particularly useful when the guage or thickness of the DC output cable is large enough to make it problematic to fit a new solder on connector. They can also provide a fast, low cost solution when a high volume of power supplies is needed with reverse polarity. Part of a wide range of DC power connectors from Tiger Power. A data sheet is available to download below.
Please contact us for direct pricing
Alternatively CLICK HERE to buy these polarity change connectors from our distributor
Cable for LED Strip Lighting
Custom Colour Cables
Custom Colour Cables. UK supplier. Fast Delivery. Manufacturer of a comprehensive range of high quality cable to to your RAL or Pantone colour reference
- We can accomodate any custom cable requirement. There is no minimum order requirement
- Fast lead times apply – Typically 7 – 14 days for sample manufacture
- Massive range of cable type
- High quality and competitive custom made colour cables for a wide range of applications
DC Red Black Cable with 2.1mm Socket
DC Red Black Cable with 2.1mm Connector
Micro USB Cable 1 Metre Black
Mains Cable on Reels
LED Strip Lights High Efficiency Series 150lm/W
COB LED Strip – Premium Series
COB LED strip - Premium Series
- Colour options from 1800K to 8000K (Datasheet only shows 2700K - 6500K)
- Choice of power ratings
- Fully dimmable by a wide range of methods including PWM, 0-10V, DALI and DMX
- Supplied on 5 or 50 metre reels or supplied in custom lengths
- operates from either 12vdc or 24vdc constant voltage input
- High CRI 90 or above
- Available as standard and waterproof
- Super High Luminous Flux
- New generation, lighter and thinner
- Seamless linear lighting with good flexibility
- Long life, dot free, no shadows
Ultra High Brightness LED Strip TGR-UHB series
Model TGR-UHB series (refer to data sheet below for full range)
- Colour options from 2550K to 6800K
- Choice of power ratings from 14.4 watts to 43.2 watts per metre
- Fully dimmable by a wide range of methods including PWM, 0-10V, DALI and DMX
- Supplied on 5 or 50 metre reels or supplied in custom lengths
- operates from 24vdc constant voltage input
- High CRI 90 or above
- Up to 160 lumens per Watt
- Available as standard and waterproof
- Double side thermal conductive tape or 9080H 3M self adhesive tape
- Super High Luminous Flux
- Up to 6826 lumens per metre
LED Strip – Continuous Light – No Dot Series – 10W/M
Model CON-XXXXK-xxV
- XXXXK = colour temperature - see data sheet for options
- Choice of 5 light colours
- Features hidden control resistor and 512 flexible chips per metre
- Supplied on 5 metre reels
- 24vdc or 12vdc input ranges available - see data sheets below
- Cuttable every 35.7mm (12v) or 62.5mm (24v)
- CRI>92 (colour render index)
- Up to 100 lumens per Watt
- Power usage 10 watts per metre (50 watts for 5 metre reel)
LED Panel Light 6500K 38W 595 x 595mm
Model PANEL-38W-CW
- Lumen output 3800lm (100lm/W) High Brightness
- 6500K Cool White Light
- Supplied complete with LED driver
- Easy install - Just drop into ceiling grib to replace existing ceiling panels
- Dimensions 595 x 595mm
- IP20 rated for indoor use only
- Durable Aluminium contrustion for superior heat dissipation
- 30,000 hour expected life span
- UK stock for fast delivery