Shop
Request a quotation
60W LED Driver 12V Waterproof
60W LED Driver 12V Waterproof from from Tiger Power is a single output constant voltage LED driver rated to IP67 making it suitable for use indoors or outside. The IP67 rating of this LED driver means it is totally protected against dust and also protected against the effects of temporary immersion to a depth of between 15cm and 1 metre for up to 30 minutes. The IP rating of this 60W LED Driver 12V is provided by the two numbers, (the 6 and the 7) with an IP67 rating providing one of the highest levels of protection against the elements helping to ensure reliability.
This led driver power supply has no minimum load so it can be used for any application that requires 12V up to its maximum rating of 5 amps / 60 Watts. This means for example, it can be used to power some LED strip that only requires 5 watts of power. The LED strip or other lighting will only draw as much power from this LED driver as it requires. Supplied by one of the UKs leading providers of power conversion products. Please get in touch for direct pricing or technical assistance.
Part number: TGR-60W-12V-W
- Single constant voltage, regulated 12V output
- No minimum load - Use for any requirement from 0 amps (0 watts) to 5 amps (60 watts)
- 220vac to 240vac input (suitable for use in UK and Europe)
- CE and UKCA safety marked and approved
- Short circuit and over load protection for safety
- IP67 rated for dust and water protection - can be used inside or outside
- Consult with an electrician before installing
- Meets latest efficiency legislation & features very low no load power consumption
- 15cm in / out cable lengths - to extend cables use with our waterproof cable joints
- Compact size - measuring 163 x 43 x 33mm
75W IP67 Waterproof LED Drivers
- Constant Voltage Output either 12vdc or 24vdc
- 5 Year Warranty
- CE and UL approved
- 100-240vac Input
- Over Voltage, Overload, Short Circuit & Over Temperature Protection
- IP67 rated for Ingress Protection
- 100% Full Load burn in tested
- Class II design
- Power Factor > 0.9
- Safety approved to EN61347-1, EN61347-2-13
- Dimensions: 140 x 63 x 32mm
100W IP67 Waterproof LED Drivers
150W IP67 Waterproof LED Drivers 12V 24V
- Constant Voltage Output either 12vdc or 24vdc
- 5 Year Warranty
- CE and UL approved
- 100-240vac Input
- Over Voltage, Overload, Short Circuit & Over Temperature Protection
- IP67 rated for Ingress Protection
- 100% Full Load burn in tested
- Class II design
- Power Factor > 0.9
- Safety approved to EN61347-1, EN61347-2-13
- Dimensions:
- See full data sheet below
200W LED Driver IP67 Waterproof 12V 24V
- Constant Voltage Output either 12vdc or 24vdc
- 5 Year Warranty
- CE and UL approved
- 100-240vac Input
- Over Voltage, Overload, Short Circuit & Over Temperature Protection
- IP67 rated for Ingress Protection
- 100% Full Load burn in tested
- Class II design
- Power Factor > 0.9
- Safety approved to EN61347-1, EN61347-2-13
- Dimensions: 199 X 63 X 35.5MM
- See full data sheet below
Mains Leads
Tiger Power Supplies offer an extensive range of mains leads available as UK, European, USA, Australian and bare end versions. Not only do we have plenty of options for the plugs, we also are able to supply different lengths and input leads - whether you need an IEC kettle lead or C8 Figure 8 we can be sure to help. We have a great variety of parts in stock ready to ship at very competitive prices. All the mains leads we offer meet the standards for the country it is designed to be used in. If you cannot see the type of power cord you need, please contact us at info@tigerpowersupplies.com as we also offer a custom build service.
2.1mm Push On Power Connector
2.1mm Push On Power Connector range rom from Tiger Power are fast fit connectors consisting of a plug and socket. The industry standard size of 2.1mm is the most common DC power connector type in the industry. To use, just strip the wires, push the top level down and insert the cable. Once the lever is released the cable is locked in place
Part number: CON21-TERM and CON21-TERM-SOCKET
(refer to data sheet below)
- 8A maximum current rating
- 48V maximum voltage rating
- Perfect for AC or DC applications
- UK stock for fast delivery
- Fast and easy to use
- Both plug and socket available
- Industry Standard Size
Waterproof Cable Joint with Quick Wire Connector
Waterproof Cable Joint with Quick Wire Connectors from from Tiger Power are a range of fast fit connectors for connecting single or multiple wires together in a low cost, time saving way. They come in both 2 pole and 3 pole options. Supplied by one of the UKs leading providers of power supply products
Part number: CON-WP-IP68 (refer to data sheet below)
- Quickly connect single or multiple wires together
- Waterproof housing rated to IP68
- Split one wire into multiple outputs
- 250v rated
- Perfect for AC or DC applications
- 32A maximum rated current
- UK stock for fast delivery
- Compact design and reliable build
Heat Shrink Solder Sleeve
Heat Shrink Solder Sleeves from Tiger Power in a wide range of sizes. These connectors allow two wires to be quickly and easily joined, combining an adhesive inner lining for a water tight seal and enhanced connectivity thanks to the low melt point solder section.
Part number: TGR-HSS series (refer to data sheets below)
Click here to view the TGR-HSS on our distributors site- Quickly connect single or multiple wires together
- Suitable for wires from 0.25mm to 10mm
- Wire sizes from AWG8 to AWG26
- 7 different size options
- No crimping required
- Low cost and easy to use
- UK stock for fast delivery
- Waterproof seal - Built in solder & adhesive linings