LED Drivers
Request a quotation
LED drivers make up a large part of the range offered by Tiger Power Supplies. As one of the most experienced suppliers of LED drivers in the UK we can offer a wide range of LED drivers from stock for indoor or outdoor use. Our LED drivers are all safety approved and meet latest energy efficiency legislation and we use high quality components to ensure maximum MTBF. Once one the selected product page you will be able to configure your LED driver, choosing between our constant current LED drivers and constant voltage drivers. We also offer mains dimmable LED drivers as you will see below
LED Drivers – Thin Series
12V LED Driver
DALI LED Driver Waterproof IP66 Dimmable 200W with NFC
- Wide range 100-277vac input
- Low Ripple & Noise
- Long Life Components
- Waterproof rated to IP66 for indoor or outdoor use
- Power Factor Correction (PF > 0.9)
- Perfect for use with LED strip lighting and 12V or 24V bulbs
- Available in both 12V and 24V
- 200W Power Ratings
- 0 - 100% Dimming (LED start at 0.1%)
- Built in NFC feature for output voltage adjustment and to set address
- Refer to datasheet below for full details including dimensions
DALI LED Driver – Waterproof IP66 Dimmable 30W to 300W
- Wide range 100-277vac input
- Low Ripple & Noise
- Long Life Components
- Waterproof rated to IP66 for indoor or outdoor use
- Power Factor Correction (PF > 0.9)
- Perfect for use with LED strip lighting and 12V or 24V bulbs
- Available in both 12V and 24V
- Power Ratings from 30 Watts to 300 Watts
- Refer to datasheet below for full details including dimensions
TRIAC Dimmable LED Driver 100-277VAC input 20W to 100W
- Wide range 100-277vac input
- Soft start
- Low Ripple & Noise
- Long Life Components
- Indoor Use Only (IP20 rated)
- Screw terminals for fast installation
- Power Factor Correction (PF > 0.9)
- Constant Voltage Output
- Power Ratings from 20 Watts to 100 Watts
- Refer to datasheet below for full details including dimensions
- Dimmable Range 0-100% typical (varies according to quality of wall dimmer switch)
LED Driver Dimmable 180 to 240V input 12W to 100W
- Wide range 180-240vac input
- Soft start
- Low Ripple & Noise
- Long Life Components
- Indoor Use Only
- Screw terminals for fast installation
- Power Factor Correction (PF > 0.95)
- Perfect for use with LED strip lighting and 12V or 24V bulbs
- Available in both 12V and 24V
- Power Ratings from 12 Watts to 100 Watts
- Refer to datasheet below for full details including dimensions
- Dimmable Range 10-100% typical (varies according to quality of wall dimmer switch
Power Supply 12V 5A 60W Lugged UK Wall Mount Lead In Out
Part number: TP1018-W
- Single constant voltage, regulated 12V output
- No minimum load - Use for any requirement from 0 amps (0 watts) to 5 amps (60 watts)
- 220vac to 240vac input (suitable for use in UK and Europe)
- CE and UKCA safety marked and approved
- Short circuit and over load protection for safety
- IP20 rated for indoor use only
- Meets latest efficiency legislation & features very low no load power consumption
- 1.5M in / out cable lengths
- Compact size - SEE FULL DATASHEET below
60W LED Driver 12V Waterproof
Part number: TGR-60W-12V-W
- Single constant voltage, regulated 12V output
- No minimum load - Use for any requirement from 0 amps (0 watts) to 5 amps (60 watts)
- 220vac to 240vac input (suitable for use in UK and Europe)
- CE and UKCA safety marked and approved
- Short circuit and over load protection for safety
- IP67 rated for dust and water protection - can be used inside or outside
- Consult with an electrician before installing
- Meets latest efficiency legislation & features very low no load power consumption
- 15cm in / out cable lengths - to extend cables use with our waterproof cable joints
- Compact size - measuring 163 x 43 x 33mm
75W IP67 Waterproof LED Drivers
- Constant Voltage Output either 12vdc or 24vdc
- 5 Year Warranty
- CE and UL approved
- 100-240vac Input
- Over Voltage, Overload, Short Circuit & Over Temperature Protection
- IP67 rated for Ingress Protection
- 100% Full Load burn in tested
- Class II design
- Power Factor > 0.9
- Safety approved to EN61347-1, EN61347-2-13
- Dimensions: 140 x 63 x 32mm
100W IP67 Waterproof LED Drivers
150W IP67 Waterproof LED Drivers 12V 24V
- Constant Voltage Output either 12vdc or 24vdc
- 5 Year Warranty
- CE and UL approved
- 100-240vac Input
- Over Voltage, Overload, Short Circuit & Over Temperature Protection
- IP67 rated for Ingress Protection
- 100% Full Load burn in tested
- Class II design
- Power Factor > 0.9
- Safety approved to EN61347-1, EN61347-2-13
- Dimensions:
- See full data sheet below
200W LED Driver IP67 Waterproof 12V 24V
- Constant Voltage Output either 12vdc or 24vdc
- 5 Year Warranty
- CE and UL approved
- 100-240vac Input
- Over Voltage, Overload, Short Circuit & Over Temperature Protection
- IP67 rated for Ingress Protection
- 100% Full Load burn in tested
- Class II design
- Power Factor > 0.9
- Safety approved to EN61347-1, EN61347-2-13
- Dimensions: 199 X 63 X 35.5MM
- See full data sheet below

Lugged Power Supplies
Industrial Power Supplies
Open Frame Power Supplies
Security Power Supplies
Din Rail Power Supplies
Battery Chargers
Custom Power Supplies
Switch Mode Power Supplies
Waterproof LED Drivers
LiFePO4 Batteries
Mains Leads
DC Cables
Rewireable Plugs
LED Strip
LED Controllers
LED Lighting Accessories
LED Panels
Fixed Input Unregulated – PCB mount
Fixed Input Regulated – PCB mount
Wide Input Regulated DC-DC Converters – PCB mount
Switching Regulators – PCB mount
High Power DC-DC Converters – Industrial Enclosed (15W to 1000W)
Railway Standard DC-DC Converters EN50155 – 100W to 300W
Open Frame DC-DC Converters – 5W to 45W